Answered

What should you do when the meter powers up, but the display does not change when making voltage measurements?


ACycle the meter to OFF then ON to reset the meter.
BCheck the internal fuse.
CCheck the 9V battery.
DSelect all the push buttons until you see a change.

Verified Answer :

Final answer:

If the meter powers up but the display does not show changes during voltage measurements, first cycle the meter off and on. Then, check the internal fuse and the 9V battery as potential issues. Selecting push buttons is less likely to solve the problem compared to these more practical steps.


Explanation:

Troubleshooting Meter Display Issues

When the meter powers up but the display does not change during voltage measurements, it can be frustrating. Here are the steps you should take to diagnose the problem:

  1. Cycle the meter to OFF then ON to reset the meter: This is often the easiest first step, as it can resolve minor glitches in the device.
  2. Check the internal fuse: If the fuse is blown, the meter may not function properly, even if it appears to power on.
  3. Check the 9V battery: An undercharged or dead battery can lead to display issues since the device requires power to operate effectively.
  4. Select all the push buttons until you see a change: While this might seem like a potential fix, it is less effective than the previous steps and may not address the underlying issue.

Of these options, the best approach is to start with cycling the meter off and on, followed by checking the battery and fuse, as these are the most common culprits behind such problems.


Learn more about meter troubleshooting here:

https://brainly.com/question/44166570


Related Questions